Thursday, 17 November 2011

Air Filter Support Bobbins

All four of the air filter mounting bobbins had sheared, so the filter casing was bouncing around, making a right old noise.  So replacement bobbins were ordered and I got around to fitting them today. It's not a difficult job but is a bit fiddly.

I loosened the Jubilee clips, removed the air intake and outlet pipes and then removed the air filter housing.












I then removed what was left of the old bobbins before fitting the new ones to the bottom of the filter housing.












This was then flipped over and refitted. A little washing up liquid helped with refitting the pipes.

2 comments:

  1. Thanks Mike...I see you are a fellow blogger!
    I will be having a look very soon ;)

    ReplyDelete